About This Manual
Copyright
Copyright © 2016 Digital Data Communications GmbH. All rights reserved.
The products and programs described in this User’s Manual are licensed
products of Manufacture Technology, This User’s Manual contains proprietary
information protected by copyright, and this User’s Manual and all
accompanying hardware, software and documentation are copyrighted. No
parts of this User’s manual may be copied, photocopied, reproduced,
translated or reduced to any electronic medium or machine-readable from by
any means by electronic or mechanical. Including photocopying, recording, or
information storage and retrieval systems, for any purpose other than the
purchaser’s personal use, and without the prior express written permission of
Manufacture Technology.
.
Purpose
This manual gives specific information on how to operate and use the
management functions of the GEL-2681
Audience
The Manual is intended for use by network administrators who are
responsible for operating and maintaining network equipment;
consequently, it assumes a basic working knowledge of general
switch functions, the Internet Protocol (IP), and Simple Network
Management Protocol (SNMP).
CONVENTIONS
The following conventions are used throughout this manual to show
information.
WARRANTY
See the Customer Support/ Warranty booklet included with the
product. A copy of the specific warranty terms applicable to your
Manufacture products and replacement parts can be obtained from
your Manufacture Sales and Service Office authorized dealer.
Disclaimer
Manufacture Technology does not warrant that the hardware will
work properly in all environments and applications, and marks no
warranty and representation, either implied or expressed, with
respect to the quality, performance, merchantability, or fitness for a
particular purpose. Manufacture disclaims liability for any
inaccuracies or omissions that may have occurred. Information in
this User’s Manual is subject to change without notice and does not
represent a commitment on the part of Manufacture. Manufacture
assumes no responsibility for any inaccuracies that may be contained
in this User’s Manual. Manufacture makes no commitment to update
or keep current the information in this User’s Manual, and reserves
the righter to make improvements to this User’s Manual and /or to
the products described in this User’s Manual, at any time without
notice.
FCC Warning
This equipment has been tested and found to comply with the limits
for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
To Next Page
Loading...
