LevelOne GEP-0523 - Page 7

7
Dansk
Fysisk installation
LED indikator
Sammenkobling af udstyr
Step1. Tjek strøm adapteren omhyggeligt og sikker at
den er forbundet til strøm kilde.
Step2. Forbind strøm adapteren med switchen.
Step3. Forbind din netvæ rks enhed med switchen vha.
et ethernet kabel ( f.eks. Cat 5e).
Link/Act
Uplink
LED
Status
Description
PWR
Green
Device active
POE
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
Green
Link to port
OFF
Link failure
Blink
Data transfer to port
SPD
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps