LevelOne GEP-0823 Quick Installation Guide

2
ENGLISH
Installation
LED Indicator
Connecting Equipment
Step1. Inspect the Power Adapter carefully, and make
sure that it is properly connected to a power
source.
Step2. Plug-in the Power Adapter to the Switch.
Step3. Connect your network devices with the switch
by using Ethernet cable. (e.g. Cat-5e)
LED
Status
Description
PWR
Green
Device active
POE P1~P8
Yellow
PoE function active and
Connected PD is supplied with PoE
OFF
PoE function deactivated or
No PD identified
L/A
P1~P8
Green
Link to port
Blink
Data transfer to port
SPD
P1~P8
Green
Transfer rate is 1000Mbps
OFF
Transfer rate is 10/100Mbps

LevelOne GEP-0823 Specifications

General

Brand	LevelOne
Model	GEP-0823
Category	Switch
Language	English