LevelOne GEP-2682 - Page 2

2
ENGLISH
Manage the Switch Using Web Browser
Installation
LED Indicator
Connecting Equipment
Step1. Inspect the Power Adapter carefully, and make sure
that it is properly connected to a power source.
Step2. Plug-in the Power Adapter to the Switch.
Step3. Connect your network devices with the switch by
using Ethernet cable. (e.g. Cat-5e)
Default IP
192.168.1.1
Usermame
admin
Password
admin
LED Indicator
Status
Meaning
Power
On
Power is on.
Off
Power is off.
Link/Act
On
Port is connected
Blinking
Transmitting / Receiving data
Off
Port is not connected