Need help?Do you have a question about the LevelOne GSW-1657 and is the answer not in the manual?
General| Switching Capacity | 32 Gbps |
|---|---|
| Forwarding Rate | 23.8 Mpps |
| Jumbo Frame Support | 9KB |
| Power Supply | Internal Power Supply |
| Ports | 16 x 10/100/1000BASE-T |
| MAC Address Table | 8K |
| Dimensions (W x D x H) | 44 mm |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Standards Compliance | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab |
Provides a high-level overview of the GSW-1657/GSW-2457 Gigabit Ethernet Switch's capabilities and benefits for network upgrades.
Details the specific features of the switch, including IEEE standards compliance, port speeds, and auto-negotiation capabilities.
Explains the switch's implementation of IEEE 802.1p priority queuing for Quality of Service management.
Provides instructions on how to properly mount the switch on a desk using the included rubber footpads.
Details the process of mounting the switch in a standard 19-inch rack using L-shaped brackets.
Guides the user through powering on the switch and describes the expected behavior of the LED indicators.
Describes the front panel of the GSW-2457, including LED indicators and RJ-45 ports.
Details the rear panel of the GSW-2457, highlighting the AC power receptacle.
Explains the purpose and behavior of the Power, Link/Act, and 1000Mbps LED indicators.
Addresses common problems where the Power LED is not lit and how to resolve them by checking connections.
Discusses scenarios where the Link/Act LED is not lit for a connected port and checks cable integrity.
To Next Page
