5
Figure 2-2 Fasten the Switch in the rack
2.3 Power On
GSW-1657/GSW-2457 16/24-port Gigabit Ethernet Switch is powered by AC
power supply. Powering on the Switch, it will automatically initialize and its LED
indicators should respond as follows:
1） All of the Link/Act and 1000Mbps LED indicators will flash momentarily for
one second, which represents a resetting of the system.
2） The Power indicator will light up.
If the LED indicators don't respond as described above, please check the
power supply and connection.
To Next Page
Loading...
