Need help?Do you have a question about the LevelOne GVM-1101 and is the answer not in the manual?
General| Type | Media Converter |
|---|---|
| Model | GVM-1101 |
| Data Transfer Rate | 10/100/1000 Mbps |
| Ports | 1 x RJ-45 |
| Standards | IEEE 802.3, IEEE 802.3u |
| Fiber Type | Multi-mode |
| Interface | RJ-45 |
| Wavelength | 850 nm |
| Connector | SC |
| Power Supply | 5V DC |
| Dimensions | 70mm x 21mm x 100mm |
Remote Managed 10/100/1000 auto-negotiation Ethernet fiber media converter with OAM functions.
Outlines four critical requirements for successful optical module connection, ensuring proper wavelength and rate matching.
Details connecting the media converter with switches, routers, and NICs using UTP cables and auto-negotiation.
Provides a sketch of the front panel and explains the meaning of each LED indicator on the device.
Guides users on logging into the web interface using the device's IP address and default credentials.
Displays local and remote device information, including MAC, IP, gateway, and software version, and remote control settings.
Details IP address, subnet mask, gateway configuration, and DHCP client settings for the device.
Explains how to change the web interface login password, including character restrictions and length limits.
Covers configuration options like Jumbo Frame, Link Transparent, Remote Fault Detect, and Link Loss Carry Forward.
Enables/disables TS1000 and sets the device as center or terminal mode for remote control.
Sets up 802.3ah OAM functions, allowing enablement/disablement and mode selection (passive/active).
To Next Page
