LevelOne GVT-2010 - Page 2

Specifications
System Specifications
Standards & Protocols:
IEEE802.3 10Base-T Ethernet,
IEEE802.3u 100Base-TX Fast Ethernet,
IEEE802.3ab 1000Base-T ,
IEEE802.3z 1000Base-SX/LX Gigabit Ethernet,
IEEE 802.3x flow control,
IEEE 802.3at POE+,
IEEE 802.3af POE
Connectors and Cabling:
1X SFP Slot or 1X SC fiber port, 1 X RJ45 port(POE PD)
Wellenlänge (nm):
depend on fiber transeiver
Indikator:
PWR (power supply),
FX LINK (optical link action)
TP 1000 (TP cable rate1000M),
TP 100 (TP cable rate 100M)
TP LINK/ACT (TP cable packet forwarding action),
FDX (TP full duplex operation)
Transmission Method:
Store and forward
Power:
External: AC90~264V/DC100~380V input, 5V/2A output,
Power over Ethernet (IEEE802.3af) 48 VDC
Features
General:
1. Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE
802.3z 1000Base-SX/LX, IEEE 802.3x flow control, IEEE 802.3at POE+, IEEE 802.3af POE
2.Media conversion between 10/100/1000Base-T and 1000Base-SX/LX
3.10/100/1000M media converter with SFP slot or SC fiber transeiver
4.Supporting auto-sensing full-duplex and half-duplex operation
5.Supporting auto-sensation of MDI/MDI-X, facilitating system commissioning and installation
6.Support jumbo frame up to 9K
7.Store-and-Forward mechanism
8.Supporting LFP function
9.Support being powered by PoE via UTP cable and AC/DC adaptor
Performance
Operating Distance:
depend on fiber transeiver
Environment
Temperatur (°C):
-10~60 with operating
-40~85 with storage
Luftfeuchtigkeit (nicht kondensierend ):
5%~90%
www.level1.com Page 2 of 3