LevelOne IGC-0101 - Key Features; Installation Package

2
Key Features
➢ Hardened Industrial graded Marvell IC
➢ Rugged design Aluminum enclosure 103.5x32x81.5mm (LxWxD)
➢ Supports 30Watts PSE on TX port
➢ Supports SFP fiber speed 100M or 1000M dual mode
➢ Surge protection diodes on power input.
➢ ESD protection diodes on RJ-45 port
➢ Provides increased Noise Immunity
➢ Working in extreme environment -40°C to 75°C
Introduction
This IGC-0101 Industrial POE media converter is equipped with Hardened Marvell IC
to provide a reliable power source to power up your remote POE device. It is designed
for Security, Transportation and Telco application to extend your network distances.
With its multi-purpose design, it can also be used for Din-Rail or wall-mounted. It is
an ideal unit for IP surveillance, traffic monitoring and Security application in critical
environment. It can tolerate -40°C to 75°C in harsh environment to perform a
reliable network.
Installation package
The following items are shipped with this device:
 Din-Rail Mounted * 1
 Wall-Mounted * 2
 Screws * 4
 4 pin Terminal Block * 1