LevelOne POI-3000 - Installation Steps; Step 1. Connect Power

Installation Steps
 Connect AC Power cord to PoE Injector, and "Power" LED will be on.
 Schließen Sie das Netzkabel an den PoE-Injektor an und die "Power"-LED leuchtet auf.
 

 Conecte el cable de energía al inyector PoE, entonces deberá encenderse el LED

 Sluit het netsnoer aan op de PoE-injector. De LED "Power" (Voeding) zal oplichten.
 
 Collegare "Power" (Potenza) si
accenderà.
 AC PoE Injector PowerLED 

 Ligue o cabo eléctrico AC ao injector PoE e o indicador LED "Power" (Energia)
ligar-se-á.
 
  (Napajanje) LED.
 連接 AC 電源到網路電源供應器並使 LED 燈亮起。
 AC 전원코드를 PoE injector 전원에 연결하면, 전원 LED 점등.
 

 
Step 1.