Connect "Data/In" port of Injector to Gigabit switch via Cat.5e/6/7 cable, and set the
correct voltage (5V, 9V or 12V) by adjustable DIP switch on the side of PoE Splitter.
(default setting 5V)
Schließen Sie das Netzkabel an den PoE-Injektor an und die "Power"-LED leuchtet auf.
Conecte el cable de energía al inyector PoE, entonces deberá encenderse el LED
Sluit het netsnoer aan op de PoE-injector. De LED "Power" (Voeding) zal oplichten.
"Power" (Potenza) si
accenderà.
AC PoE Injector PowerLED
Ligue o cabo eléctrico AC ao injector PoE e o indicador LED "Power" (Energia)
ligar-se-á.
(Napajanje) LED.
透過 Cat.5/6/7 網路線連接網路電源供應器的 Data/in 埠到 Gigabit Switch 並借由網路電源
分岐器側邊的 Dip Switch 設定正確的電壓 (5V or 9V or 12V) (初始值 5V)。
AC 전원코드를 PoE injector 전원에 연결하면, 전원 LED 점등
To Next Page
Loading...
Need help?
General
