EasyManua.ls Logo

LevelOne WBR-6013 User Manual

LevelOne WBR-6013
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
LevelOne
User Manual
WBR-6013
Version : v1.0_20161221

Table of Contents

Other manuals for LevelOne WBR-6013

Question and Answer IconNeed help?

Do you have a question about the LevelOne WBR-6013 and is the answer not in the manual?

LevelOne WBR-6013 Specifications

General IconGeneral
BrandLevelOne
ModelWBR-6013
CategoryNetwork Router
LanguageEnglish

Summary

Getting to know the device

LED meanings & activations

Explains the status lights on the front panel.

Computer configurations under different OS

For Windows 98SE / ME / 2000 / XP

Instructions for configuring IP settings on older Windows OS.

For Windows Vista-32/64

Instructions for configuring IP settings on Windows Vista.

For Windows 7/8/8.1/10-32/64

Instructions for configuring IP settings on Windows 7/8/10.

Connecting your device

Connecting the Hardware

Describes physical connections for the device.

Advanced Configuration

Operation Mode Setup

Configures the device's operation mode (Gateway, Bridge, etc.).

Wireless Basic Settings

Configures basic wireless network settings like SSID.

Wireless Security Setup

Sets up wireless security (WEP, WPA, WPA2).

Quick Setup

Quick Setup

Overview of the quick setup process.

Operation Mode

Setting Operation Mode

Configures the device's operation mode.

Wireless Network - WLAN1

Basic Settings

Configures basic wireless network settings.

Advanced Settings

Advanced wireless LAN settings for technical users.

Security

Configures wireless security settings (WEP, WPA).

LAN Interface

LAN Interface Setup

Configuration of the local area network interface.

Changing the LAN IP address and subnet mask

Modifies LAN IP and subnet mask settings.

WAN Interface

WAN Interface Setup

Interface for configuring WAN connection settings.

Configuring Static IP connection

Steps to configure a static IP connection.

Configuring DHCP Client connection

Steps to configure a DHCP client connection.

IPV6

Port Filtering

IP Filtering

MAC Filtering

Port Forwarding

URL Filtering

DMZ

802.1Q VLAN

ROUTE SETUP

QoS

Dynamic DNS

Denial-of-Service

Firmware Update

Save/Reload Settings

Resetting to Defaults

Resets the device to its factory default configuration.

Password

Troubleshooting

Related product manuals