LevelOne FBR-1161 - User Manual

Questions and Answers

K
Karen ButlerAug 16, 2025
Why does my LevelOne Modem frequently lose ADSL linesync (disconnections)?
- R
  rvangAug 16, 2025
  If you are experiencing frequent disconnections with your LevelOne Modem ADSL linesync, ensure that all devices connected to the same telephone line (telephones, fax machines, analogue modems) have a line filter connected between them and the wall socket. If you are using a Central Splitter or Central Filter installed by a qualified electrician, this may not be necessary. Make sure all line filters are correctly installed. Missing or incorrectly installed line filters can cause frequent disconnections.
M
michaelahawkinsAug 19, 2025
What to do if the initialization of the PVC connection (“linesync”) failed on LevelOne Modem?
- N
  Natasha RobinsonSep 12, 2025
  If the PVC connection (“linesync”) of your LevelOne Modem failed, ensure that the telephone cable is properly connected from the ADSL port to the wall jack, and the ADSL LED on the front panel of the router should be on. Also, check that your VPI, VCI, encapsulation type and type of multiplexing settings match those provided by your ISP. Reboot the router. If problems persist, verify these settings with your ISP.
R
Robert JonesAug 22, 2025
What to do if I can’t ping any PCs on the LAN using LevelOne Modem?
- T
  Tracey JamesAug 22, 2025
  If you can't ping any PCs on the LAN with your LevelOne Modem, first check the Ethernet LEDs on the front panel. The LED should be on for a port that has a PC connected. If it's off, check the cables between your router and the PC. Also, uninstall any software firewall for troubleshooting. Verify that the IP address and the subnet mask are consistent between the router and the workstations.
N
Nicholas JohnsonAug 25, 2025
How to reset LevelOne Modem if I forgot the login and/or password?
- R
  Rebecca SheppardAug 26, 2025
  If you have forgotten your LevelOne Modem login and/or password, try the default login and password. If this fails, restore your router to its factory settings by holding the Reset button on the back of your router for 6 seconds.
T
Timothy LambAug 28, 2025
What to do if none of the LEDs are on when I turn on LevelOne Modem?
- J
  Jeffery PrinceAug 28, 2025
  Check the connection between the adapter and the LevelOne Modem. If the error persists, you may have a hardware problem. In this case you should contact technical support.
G
Gary MitchellAug 31, 2025
Why does my LevelOne FBR-1161 keep disconnecting?
- H
  Hannah EvansAug 31, 2025
  Frequent disconnections of your LevelOne Network Router may be caused by missing or incorrectly installed line filters. Ensure that all devices connected to the same telephone line as your router, such as telephones, fax machines, and analogue modems, have a line filter connected between them and the wall socket. This excludes cases where a Central Splitter or Central Filter is installed by a qualified electrician. Also, verify that all line filters are correctly installed.
D
Dr. Jeremy BurtonSep 3, 2025
How to reset the password on a LevelOne FBR-1161 Network Router?
- C
  cfaulknerSep 3, 2025
  If you've forgotten your LevelOne Network Router login or password, first try the default login and password. If that doesn't work, restore your router to its factory settings by holding the Reset button on the back of your router for at least 6 seconds.
A
amyguerreroSep 5, 2025
What to do if I can't ping any PCs on my LevelOne FBR-1161 LAN?
- W
  william77Sep 6, 2025
  If you can't ping any PCs on your LevelOne Network Router LAN, check the Ethernet LEDs on the front panel. The LED should be on for a port that has a PC connected. If it is off, check the cables between your router and the PC. Also, make sure you have uninstalled any software firewall for troubleshooting. Additionally, verify that the IP address and the subnet mask are consistent between the router and the workstations.
E
Erin WongSep 9, 2025
How to fix PVC connection failure on LevelOne FBR-1161?
- K
  Kristi PruittSep 9, 2025
  If the initialization of the PVC connection fails on your LevelOne Network Router, ensure that the telephone cable is properly connected from the ADSL port to the wall jack. The ADSL LED on the front panel of the router should be on. Check that your VPI, VCI, encapsulation type and type of multiplexing settings are the same as those provided by your ISP. Reboot the router. If problems persist, verify these settings with your ISP.
J
James CannonSep 12, 2025
Why are no LEDs on when I turn on my LevelOne FBR-1161 Network Router?
- E
  emily59Sep 12, 2025
  If none of the LEDs are on when you turn on your LevelOne Network Router, check the connection between the adapter and the router. If the error persists, it may indicate a hardware problem, and you should contact technical support.

Summary

Installation

2.1. Important Note

Basic Installation

3.2. Factory Default Settings

3.3. Installing the USB Driver

Guides users through the process of installing the USB driver.

3.4. Configuring PC Network Properties

Details how to configure PC network settings for different Windows versions.

3.6. ISP Information

3.7. Configuring with Web Browser

Explains how to access and log into the router's web interface.

Configuration

4.1. Quick Start

Guides users through a wizard for initial internet connection setup.

Interface Setup

4.2.1. Internet

Configures the WAN connection type, encapsulation, and IP settings.

4.2.2. LAN

Sets up the router's local area network IP, DHCP, and DNS settings.

Advanced Setup

4.3.1. Firewall

Configures firewall rules and protection against network attacks.

4.3.3. NAT

Configures Network Address Translation for sharing IP addresses.

4.3.4. ADSL

Maintenance

4.5.1. Administrator

4.5.3. Firmware

Provides instructions for upgrading the router's firmware.

4.5.4. SysRestart

4.5.5. Diagnostics

Troubleshooting

Problems starting up the router

Addresses common issues encountered when powering on the router.

Problems with the WAN Interface

Provides solutions for frequent loss of ADSL linesync and connection issues.

Problems with the LAN Interface

LevelOne FBR-1161 Specifications

General

Wireless	No
Firewall	Yes
Type	Wired Router
Standards	IEEE 802.3, IEEE 802.3u
Operating Temperature	0°C to 40°C
Humidity	10% to 90% Non-condensing
WAN Ports	1 x 10/100Mbps
LAN Ports	4
VPN Support	Yes
Ports	1 x WAN, 4 x LAN
Packet Forwarding Rate	148800pps
Power Supply	5V DC
Storage Temperature	-20°C to 70°C