4.3. Advanced Setup
4.3.1. Firewall
Enable the firewall function, it provides Syn Flooding Attack, Ping of Death, Teardrop, Land
Attack and Port Scanning protections
4.3.2. Routing
If you have another router with a LAN-to-LAN connection, you may create a static routing on
the router that is the gateway to Internet.
IP address of the destination network
The destination mask address.
IP address of the gateway or existing interface that this route uses.
It represents the cost of transmission for routing purposes. The number need
not be precise, but it must be between 1 and 15.
Media/channel selected to append the route.
Counter for access times.
Edit the route; this icon is not shown for system default route.
Drop the route; this icon is not shown for system default route.