9. Change setting successfully! Do not turn off or reboot the
Device during this time. Please wait 20 seconds ...
10. Now, the WBR-6013 has been configured completely, and
suitable for Wireless and Internet Connections.
Wireless Connection
For easy installation it is saved to keep the settings. You can
later change the wireless settings via the wireless configuration
menu.
11. Double click on the wireless icon on your computer and
search for the wireless network that you enter SSID name.
12. Click on the wireless network that you enter SSID name
(the default settings, Wireless Network = Enable, Default
Channel = Auto, SSID = LevelOne 2.4G which could be
found on the bottom side of the device) to connect.
13. If the wireless network isn’t encrypted, click on "Connect " to
connect.
14. If the wireless network is encrypted, enter the network key
that belongs to your authentication type and key.(the
default settings Security Mode = WPA Mixed mode
To Next Page
Loading...
