4.2.3.4 Setup the Register Server—H.323 Protocol
/VoIP Setup/Register Server/Server
When Select use H.323 to register gatekeeper, please input the flow information
for register:
s. Register Method:
Global: All the lines of the gateway share same account to
register.
Independent: Each line can set different/same account
independently for register.
a. Enable H323 Gatekeeper :
Enable Register H.323 Gatekeeper function.
Disable Register H.323 Gatekeeper function.
b. Gatekeeper URL: Please input the IP/URL of the Gatekeeper server.
c. Port[1~65535]: Port number used for register to server. The H.323
protocol default is 1719, please make sure you have same port
number setting on the gateway and ser
d. GK ID: Some Gatekeeper Server need you input an ID for register,
please input here.
.
e. Proxy for NAT： When your gateway is installed behind the firewall
or NAT, you maybe need use Proxy server to relay your call. If your
gatekeeper supports this proxy function, you can enable gateway
function here to use that.
f. Line: Line: Number index of lines.
t. Type: Interface type of the line:
To Next Page
Loading...
