4.2.5.9 FoIP
/VoIP Setup/Advance Setup/FoIP
User can define the parameters relative FAX Over IP function.
FAX Mode
Appoint the FAX mode during FoIP:
Disable: Only the VoIP function is supported on the gateway. FoIP is
disabled. By default was disable.
T.38: Enable and supported to T.38 protocol for FoIP .
T.30: Enable and supported to T.30 protocol for FoIP, when to send
or recived FAX information will through and under the G.711 codec .
T.38+T.30: Enable and supported the T.38 and T.30 protocol
simultaneously.
Maximum FoIP Rate (bps)
Appoint the maximum FAX transceiver rate during FoIP:
Disable: Only the VoIP function is supported on the gateway. FoIP is
disabled.
Auto: Gateway will negotiation the maximum speed for FoIP with
FAX machine..
:Appoint the Maximum speed:2400,4800,9600,12000, 14000
T.38 Low Speed Redundancy: [Enable|Disable]
Enable or Disable to send the double packet function during low speed
T.38 FoIP.
T.38 High Speed Redundancy: [Enable|Disable]
To Next Page
Loading...
