4.2.6.2 Telnet & SNMP
/VoIP Setup/Application/Telnet & SNMP
User can enable and set the user account for the SNMP and Telnet function of
this gateway on this page.
a. Enable telnet server
Enable: Enable telnet service function, user can telnet this
gateway.
Disable: Disable telnet service function.
b. Enable SNMP Server
Enable: Enable SNMP service function, user can use SNMP on the
gateway.
Disable: Disable SNMP service function.
c. User Name：Set a user name for Telnet & SNM login.
d. Login Password：Set the password for Telnet & SNMP login.
e. Confirm Password：Check the password again.
To Next Page
Loading...
