LevelOne WAP-8221 - Page 4

-2-
Button Light State
Task to be Performed
Time Period of
Pressing Button
SYS LED
Behavior
WIFI SSID Broadcast ON
0 ~ 1 seconds
ON Green
WIFI SSID Broadcast OFF
0 ~ 1 seconds
Light off
Reset to Defaults
10 ~ 12 seconds
Blinking Green
Installation
LED/Button/Interface
Description
WIFI SSID Broadcast
ON/OFF
To turn on or off the WIFI SSID Broadcast
Reset to Defaults
With the AP powered on, press the Reset
button for 10 ~ 12 seconds until the
Signal Strength LED blink faster than
ever. The AP will restart itself and reset
the device to factory default settings.