Need help?Do you have a question about the LevelOne WAP-6012 and is the answer not in the manual?
General| Frequency Band | 2.4 GHz |
|---|---|
| Data Rate | Up to 300 Mbps |
| Antenna Gain | 2 dBi |
| Power Supply | 12V DC, 1A |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Wireless Standards | IEEE 802.11b/g |
| Security | WEP, WPA, WPA2 |
| Ports | 1 x 10/100 Mbps |
| Operating Modes | Access Point, Client, WDS |
| Humidity | 10% to 90% (Non-condensing) |
Provides step-by-step instructions for physically installing the wireless access point, including placement guidelines.
Guides users through configuring the access point via its web interface, including accessing the login screen.
Details how to configure fundamental system settings like Access Point Name, IP address, and DHCP client options.
Explains advanced system configurations such as VLAN support, network integrity checks, and 802.1x supplicant settings.
Covers various wireless configuration options, including basic settings, virtual APs, access control, and Wi-Fi Protected Setup.
Details the necessary WEP settings for wireless stations to match the access point, including SSID and key configurations.
Describes how to configure wireless stations for WPA-PSK/WPA2-PSK, matching the access point's network key and encryption method.
Explains how to set and manage the administrator password for accessing the device's configuration interface.
Provides instructions on how to upgrade the access point's firmware using a web browser and an upgrade file.
Addresses issues with connecting to the access point for configuration, including IP address determination and network segment checks.
Lists available CLI commands for configuring various aspects of the access point, categorized by function (get/set).
To Next Page
