95
Appendix E
Command Line Interface
Overview
If desired, the Command Line Interface (CLI) can be used for configuration. This
creates the possibility of creating scripts to perform common configuration changes.
The CLI requires a Telnet connection to the Wireless Access Point.
Using the CLI - Telnet
1. Start your Telnet client, and establish a connection to the Access Point.
e.g.
Telnet 192.168.1.1
2. You will be prompted for the user name and password. Enter the same login name
and password as used for the HTTP (Web) interface.
The default values are admin for the User Name, and password for the Password.
3. Once connected, you can use any of the commands listed in the following Com-
mand Reference.
Command Reference
The following commands are available.
To Next Page
Loading...
