Need help?Do you have a question about the LevelOne WAP-6103 and is the answer not in the manual?
General| Frequency Band | 2.4 GHz |
|---|---|
| Maximum Data Rate | 300 Mbps |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Wireless Standards | IEEE 802.11b/g |
| Ports | 1 x 10/100 Mbps Ethernet Port |
| Security | WEP, WPA, WPA2 |
| Operating Modes | Access Point, Client, Repeater |
| Power Supply | 12V DC |
| Operating Humidity | 10% to 90% non-condensing |
Guidance on installing the device, including warnings, requirements, physical setup, LEDs, and button functions.
Steps for initial setup using the Web UI and configuring wireless profiles with the WEC button.
Methods for configuring Master and Slave APs using the WEC feature for wireless networks.
Configuration of Ethernet LAN, Wireless (including modes like AP Only, WDS, Repeater), and IPv6.
Firewall, MAC Address Control, UPnP, and SNMP management settings.
Managing system information, logs, firmware upgrades, password changes, and time settings.
Resolving problems with device configuration, cable connection, and LED status.
Solutions for setup failures, client internet access, and dropped wireless connections.
Procedures for recovering lost encryption keys or resetting the device to default settings.
Guide to setting static IP addresses in Windows 7, 8.x, and XP for network setup.
Information on third-party software licenses, including the GNU General Public License.
To Next Page