PC Configuration
42
5. Ensure your TCP/IP settings are correct, as described below.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is
the default Windows setting. Using this is recommended. By default, the Wireless
Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the Wireless Router.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before
making the following changes.
Enter the Wireless Router's IP address in the Default gateway field and click
OK. (Your LAN administrator can advise you of the IP Address they assigned to
the Wireless Router.)
If the DNS Server fields are empty, select Use the following DNS server ad-
dresses, and enter the DNS address or addresses provided by your ISP, then
click OK.
To Next Page
Loading...
