LevelOne WBR-6002 - Page 85

Advanced Features
82
Category
Applications:
 Add a New Application (Once selected, please complete
the following setups.)
 Ip/Net: Enter the IP address.
 Rate: Enter the desired rate value.
 Priority: Select the desired option (High, Normal, Low)
 Direct: Select Upstream or Downstream as required.
 Self-Define
 Name: Enter a name for your device.
 Port Range: Enter the value for the desired port range.
 Protocol: Select the desired option.
 Ip/Net: Enter the IP address of your device.
 Rate: Enter the desired rate value.
 Priority: Select the option (High, Normal, Low) from the
list.
 Direct: Select Upstream or Downstream as required.
Summary
Priority
The general Information of this Application or IP Address.
Name
The Name of this Application or IP Address.
Information
The general Information of this Application or IP Address.
Note: Rate Control and Priority methods cannot be used at the same time.