LevelOne WBR-6800 - Rear View

8
Rear View
Antenna
To connect the supplied antenna
WAN
10/100 RJ-45 Ethernet Port to connect to a modem or router
LAN
10/100 RJ-45 to connect to Ethernet network card or Hub/Switch
Reset
To reset the WBR-6800 to factory default settings.
Press and hold the reset button for 5 seconds.
(All your customized settings will be lost)
Power
Connect to the included Power Adapter
WPS
WiFi Protected Setup Push Button
Press the button for 1 second to initiate WPS.