What to do if my LevelOne Wireless Router is not working?
If your LevelOne Wireless Router isn't functioning as expected, ensure that the device is powered on. If the problem persists, locate the Reset button on the right side of the router, press and hold it for 8 seconds, and then release. After the router reboots, it will revert to its factory default settings.
General| Brand | LevelOne |
|---|---|
| Model | WBR-6803 |
| Category | Wireless Router |
| Language | English |
Details FCC regulations and potential interference issues with the device.
States compliance with European electromagnetic compatibility directives.
Informs about compliance with essential requirements of Directive 1999/5/EC.
Lists all items included in the product package.
Provides instructions and diagrams for physical setup of the router.
Step-by-step guide for configuring the router using the provided Windows software.
Instructions for setting up the router via its web-based user interface.
Covers fundamental network configuration like IP, DHCP, and wireless.
Details on configuring virtual servers, special applications, and DMZ.
Options for packet filtering, domain/URL blocking, and MAC control.
Configuration for system log, DNS, QoS, SNMP, routing, and system time.
Utilities for system info, firmware upgrade, backup, reset, and reboot.
Addresses common problems with router configuration and connectivity.
Troubleshooting steps for issues with the wired Ethernet connection.
Solutions for failures or drops with the 3G network connection.
Guidance for setup, access, and dropping problems with wireless connectivity.
Steps to take if the wireless encryption key is forgotten.
Instructions on how to restore the router to its factory default settings.
To Next Page
