Chapter 2
Initial Installation
This Chapter covers the software installation of the Wireless Adapter.
Requirements
• Windows 2000/XP/Vista
• CardBus Card Slot
• CD-ROM Drive.
• IEEE802.11n, IEEE802.11b or IEEE802.11g Wireless LAN.
Procedure
You should install the supplied software BEFORE inserting the Wireless
Adapter.
1. Insert the CD-ROM into the drive on your PC.
2. The installation program should start automatically. If it does not, run autorun.exe
program.
3. Select the desired installation language on the screen.
Figure 1: Start Installation
4. On the screen above, click "Next" to start the installation.
5. Step though the procedure.
2
To Next Page
Loading...
