Leviton 70A00-2 - Specifications; Preventing Malfunction

11
Specifications
Operating Temperature: -10°C - +60°C
Noise: not to exceed 60dB (A)
Humidity: 5% - 95% relative humidity, non-condensing
Atmosphere Pressure: 86 - 106KPa
Input Voltage: 100 – 240VAC
Operating Power: DC 12V, 500mA
Frequency ranges:
GSM850: 824-849MHzTX; 869-894MHzRX
PCS1900:1850-1910MHzTX; 1930-1990MHzRX)
Power Output:
--Class 4 (2W @ 850/900MHz)
--Class 2 (1W @1800/1900MHz)
Air Interface Standard:
--GSM850/1900MHz, 900/1, 800MHz phase 2+ full band
Dial Tone Frequency: 450Hz
Antenna Interface: Antenna amplifying >2.5dB
Sensitivity: <=104dBm
Environment Noise: <60dB
Dimensions: 8.125” x 5.125” x 1.25”
Preventing Malfunction
• Avoid using, placing or storing the equipment in places subject to strong sunlight or high
temperatures. Exposure to intense sunlight and heat may cause the battery to leak,
overheat or explode, resulting in fire, burns or other injuries. High temperatures may also
cause deformation of the casing. Ensure that there is good ventilation when using the
equipment.
• Do not store the equipment in humid or dusty areas. Storage in such areas could lead to
fire, electrical shock, or other damage.
• Do not operate beyond its specified temperature, humidity, or power source ratings. Do not
use this device in a high temperature or high humidity area.
WEB VERSION