15
6. Control unit
6.1. VR2-control
6.1.1. On-/ Off-button
6.1.2. Battery gauge
On the control unit you find a joystick,
buttons and symbols. We take a
closer look at these in the following
sections.
With the On-/ Off-button the chair
can be turned on or switched off. Do
not use this button to stop the
wheelchair unless there is an
emergency.
The battery gauge shows you that
the wheelchair is switched on and it
shows you how much power there is
left in the batteries. The gauge is also
used for electronic fault detection
(see chapter 18.)
To Next Page
Loading...