Levo C3 - 13.3. Vehicle Transport (With Occupant)

41
13.3. Transportation in a vehicle with the person in the
wheelchair
The LEVO C
3
has been crash tested according to standards ISO 7176/19 both
with a 4-point Wheelchair Tie Down and Occupant Restraint Systems (WTORS).
Please read the information/instructions below before using
LEVO C
3
for car transportation:
Danger!
- Ensure that the vehicle is suitably equipped to transport a passenger
in a wheelchair, and ensure the method of access /egress is suitable
for your wheelchair type.
- The vehicle should have the floor strength to take the combined
weight of the occupant, the wheelchair and accessories.
- The wheelchair should be secured in a forward facing direction. This
wheelchair is tested to ISO 7176-19, for use in road vehicles and
meets the requirements for forward facing transport and head on
collisions. The wheelchair has not been tested for other directions in a
vehicle.
- Use WTORS (Wheelchair Tie Down and Occupant Restraint Systems) only
in accordance with the WTORS manufacturer’s instruction.
Danger!
- The wheelchair can only be secured by using the tie-down points on
the wheelchair’s frame
- The tie-down points (2 in the front, 2 in the back) are indicated by the
tie-down symbol.
- The wheelchair may not be secured onto any accessories (wishbones,
armrests, anti-tip brackets etc.).
- No changes or replacements must be made to the anchorage
points/car fastenings on the wheelchair for docking system or 4 point
strap tie down systems, or to constructional elements or parts of the
frame without consulting the manufacturer.