Levoit Aura Smart User Manual

15
Installing Thermostat with a C Wire:
1. Remove the old backplate
Unscrew the old backplate from the wall. [Figure 2.1] Hold the wires and carefully pull the backplate from the wall, making
sure the wires do not fall into the wall.
Note: If your system has a C wire, you do not need to install the power extender kit (PEK). The thermostat will use the
C wire for power.
Figure 2.1

Levoit Aura Smart Specifications

General

Brand	Levoit
Model	Aura Smart
Category	Thermostat
Language	English