Levoit Classic 300S - Detailed Component Cleaning; Noise Silencer and Float Cleaning; Component Scrubbing and Scale Removal

18
Figure 4.9
Figure 4.10
Figure 4.11
Figure 4.13
Figure 4.12
g. Place the float and noise silencer
in a small container. Fill with
enough vinegar to cover them.
Soak for 15–20 minutes.
[
Figure 4.12 ]
f. Remove the float from the base
chamber by pulling up the larger
side of the float [
Figure 4.10 ] and
pulling the shaft out from the float
brackets. One side of the float
brackets is open (U-shaped) to
allow the shaft to be removed.
[
Figure 4.11 ]
h. Use a soft cloth and the included
cleaning brush to remove scale
from all parts. [
Figure 4.13 ]
e. Flip the tank over and remove
the noise silencer. To remove the
noise silencer, press the release
tab and gently pull away from the
humidifier. [
Figure 4.9 ]
Cleaning (cont.)