Levoit Classic 300S - Filling and Refilling Procedures; Water Tank Filling; Important Filling Safety Notes

9
Filling & Refilling
1. Remove the water tank cover by holding
the nozzle and pulling upward.
[
Figure 1.4 ]
Figure 1.4
Figure 1.5
2. Use the handles to remove the tank
from the base. Fill the tank with room-
temperature water. [
Figure 1.5 ]
Do not fill with hot water.
Note:
• We recommend using purified or distilled
water to fill the tank.
• Do not fill past the tank’s max water line.
Figure 1.6
Figure 1.7
Figure 1.8
• Do not add water directly into the base
chamber. [
Figure 1.6 ]
CAUTION
• Do not add water through the mist tube.
• Do not add essential oils into the
humidifier. [
Figure 1.7 ] Only add
essential oils to the aroma pad.
[
Figure 1.8 ]
• Do not use water treatment liquids or
third-party water filters in this humidifier.