The product, in accordance with the Eco-design Requirements for Energy Related Products
Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC)
NO. 1275/2008, as amended by Regulation (EU) No. 801/2013.
ABOUT ENERGYRELATED PRODUCTS
Required Power State Information Networked Standby
Power consumption in specified power
mode, at 230V/50Hz input
≤ 2.0 W
Time after which equipment is automatically
switched into mode
Immediately
Network port deactivation/activation
procedures
Disconnecting the Wi-Fi connection will
deactivate the Wi-Fi network. Connecting the
device to Wi-Fi will activate the Wi-Fi network.
Networked Standby Mode: When the Wi-Fi network is activated, press and hold the On/O
button, and the device will immediately enter the networking standby state.
EN
19
To Next Page
Loading...
