10
When the tower fan is in standby or turned
o and unplugged, it will remember all its
previous settings, except for timer.
Advanced Sleep Mode is an optimized sleep
mode that takes into account the stages
before you sleep, during sleep, and as you
wake up.
Turn on Auto Display O if you would like the
display to automatically turn o when there is
no operation.
• The tower fan is in Standby Mode
when it is turned o, but plugged in.
• Tap to turn the tower fan on.
Advanced Sleep Mode
Auto Display Off
Memory Function
Standby Mode
USING YOUR TOWER FAN (CONT.)
1. Tap to turn Advanced Sleep Mode
on. will show on the display.
1. Press and hold for 3 seconds to
turn on Auto Display O.
2. After 60 seconds of no operation, the
display will automatically turn o (except
in Advanced Sleep Mode).
3. Tap any button to temporarily turn the
display back on. If you don’t tap another
button, the display will turn back o after
60 seconds.
4. Press and hold for 3 seconds to
turn o Auto Display O.
A. If the temperature increases 5°F,
the fan speed will increase one level.
B. If the temperature decreases 5°F,
the fan speed will decrease one level.
A. After 5 seconds, the display will
turn o and selection sounds will be
disabled.
B. The starting fan speed is determined
by your current fan speed when you
select Advanced Sleep Mode.
A. If the temperature increases 5°F, the
fan speed will increase one level.
B. If the temperature decreases 5°F, the
fan speed will decrease one level.
2. After 1 hour, the tower fan will decrease
fan speed as the room temperature
stabilizes.
3. The tower fan then begins oscillating and
enters Auto Mode. This automatically
adjusts the fan speed according to the
fluctuating room temperature as you
sleep and wake up.
4. Tap or to turn Advanced Sleep
Mode o.
3. Optionally, tap to manually adjust
the fan speed while in Auto Mode. The
tower fan will then operate according to
the following logic:
To Next Page
Loading...
Need help?
General
