EasyManuals Logo

Levoit Vital 100 User Manual

Levoit Vital 100
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
KEEPING THINGS CLEAN (CONT.)
1. Unplug the air purifier and remove the
filter cover.
2. Remove the old air filter and properly
dispose of it.
3. Clean out any remaining dust or hair
inside the air purifier using a vacuum
hose. Do not use water or liquids to
clean the air purifier. [Figure 3.1]
4. Unwrap the new filter and place
inside the air purifier with the pull tabs
facing out.
5. Replace the filter cover. The air purifier
will not power on unless the filter cover
is replaced correctly.
6. Reset the Check Filter Indicator (see
page 11).
Replacing the Air Filter
Storage
If not using the air purifier for an extended
period of time, wrap both the air purifier and
the filter in plastic packaging and store in a
dry place to avoid moisture damage.
Figure 3.1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Levoit Vital 100 and is the answer not in the manual?

Levoit Vital 100 Specifications

General IconGeneral
TimerYes
Efficiency99.97 %
Noise level50 dB
CertificationCARB, FCC, ETL
Air purify rate221 m³/h
Number of speeds3
Noise level (low speed)23 dB
Operating temperature (T-T)-10 - 40 °C
Suitable for room area up to90.6 m²
Operating relative humidity (H-H)0 - 85 %
Particle filtration0.3 µm
Filtering capabilityCigarette smoke, Fine dust, Pollen
Control typeTouch
Display typeLED
Product colorWhite
AC input voltage120 V
AC input frequency60 Hz
Power consumption (max)55 W
Weight and Dimensions IconWeight and Dimensions
Depth162 mm
Width324 mm
Height410 mm
Weight4200 g

Related product manuals