Lewmar Ocean 3 User Manual

OWNERS INSTALLATION, OPERATION AND SERVICE MANUAL
INSTALLATIONS-, BEDIENUNGS- UND WARTUNGSHANDBUCH FUR BOOTEIGENTUMER
MANUAL DU PROPRIETAIRE, INSTALLATION, MISE EN SERVICE ET ENTRETIEN
MANUAL DEL PROPIETARIO. INSTALACION, FUNCIONAMIENTO Y MANTENIMIENTO
INSTALLATIONS, INSTRUKTIONS SAMT SERVICE MANUAL
Issue 5
Concept/Ocean/Capstan 1, 2 & 3
Windlass Range
TO BE KEPT WITH BOAT DOCUMENTS
BEI DEN SCHIFFSPAPIEREN AUFBEWAHREN
A CONSERVER AVEC LES DOCUMENTS DU BATEAU
PA ADJUNTAR A LA DOCUMENTACIÓN DE LA EMBARCACION
BÖR FÖRVARAS I BÅTEN

Lewmar Ocean 3 Specifications

General

Brand	Lewmar
Model	Ocean 3
Category	Ranges
Language	English

Summary

Electric Wiring Installation

Contactor and Switch Positioning

Position control box/solenoid switches near windlass in a dry environment.

Cable Routing and Connection

Route cables from motor to control box, and to circuit breaker/battery.

Safety Switch Placement

Locate switches for visibility of windlass, line, and bow roller.

Battery Cable Connection

Secure cables, fit rubber boots, apply grease for protection.

Hydraulic Line Installation

Unit Compatibility and Line Routing

Use Lewmar Commander or similar unit; plan line routing, ensure correct hose size.

Hydraulic Connection Procedure

Connect feed and supply lines securely to the hydraulic motor.

Switch Installation and System Requirements

Locate switches, connect to Commander or system, ensure 3A min supply, 12/24v DC.

Pressure Restriction for Capstan 2

Operating Your Windlass

Basic Up/Down Operation

Use UP and DOWN switches/buttons for raising and lowering the windlass.

Manual Chain Release

How to manually release the chain by loosening the top nut.

Capstan Operation

Using the capstan feature independently from the main windlass.

Emergency Manual Override

Procedure for manual override in emergencies.

Maintenance

Above Deck Maintenance

Below Deck Maintenance

Electrical Connections

Concept/Ocean 1 & 2 Dual Direction Control Box Wiring

Concept/Ocean/Capstan 1 & 2 Single Direction Control Box Wiring

Electrical Connections (Continued)

Concept/Ocean 1 & 2 Dual Direction Contactor Wiring

Concept/Ocean 3 Dual Direction Control Box Wiring

Concept/Ocean 3 Dual Direction Contactor Wiring

Concept/Ocean/Capstan 1 & 2 Single/Dual Direction Solenoid Switch Wiring

Concept/Ocean/Capstan 3 Single Direction Control Box Wiring

Concept/Ocean/Capstan 3 Single Direction Solenoid Switch Wiring

Fault Finding

Motor and Operation Checks

Diagnose issues related to motor operation, gypsy rotation, and safety switches.

Installation and Connection Verification

Check installation, wiring, motor connections, battery power, and gypsy size.

Cable, Voltage Drop, and Mounting Checks

Verify cable sizes, voltage drop, and parallel mounting alignment.

Troubleshooting Procedures

Follow specific steps for cleaning, charging, and diagram verification.