3-24
The SETUP Menu
Lexicon
THX SETUP
Default
Parameter Value Values
FRONT L/R THX 80Hz THX 80Hz
CENTER THX 80Hz THX 80Hz
SIDE L/R THX 80Hz THX 80Hz
REAR L/R THX 80Hz THX 80Hz, NONE
SUB L/R MONO MONO
SUB XOVER THX 80Hz THX 80Hz
LFE OFF OFF
The THX SETUP menu can be used to configure the MAIN AUDIO
OUTPUTS for a THX-certified speaker system. For a non-THX-
certified speaker system, use the CUSTOM SETUP menu (see page
3-18). When THX SETUP is selected, a message will appear
cautioning that, if the right MENU arrow is pressed again, the
MAIN AUDIO OUTPUTS will automatically change to a THX
speaker configuration. This will override custom speaker settings
that have been chosen. Press the right MENU arrow to activate a
THX speaker configuration. Press the left MENU arrow to cancel
THX speaker configuration and return to the SPEAKER SETUP menu.
If a THX speaker configuration is activated, the THX SETUP menu
will display the THX configuration settings. The unit will
automatically set all outputs to THX 80Hz with a 12dB per octave
filter. The only exceptions are SUB L/R and LFE. SUB L/R will be set
to MONO (see page 3-22) and LFE will be set to OFF (see page
3-23). THX speaker configuration applies to all inputs and
listening modes.
SETUP SPEAKERS THX SETUP
THX SPEAKER SETUP
!CAUTION!
PRESSING THE RIGHT V
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A THX
SPEAKER
CONFIGURATION
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
THX SETUP
FRONT L/R THX 80Hz
CENTER THX 80Hz
SIDE L/R THX 80Hz
REAR L/R THX 80Hz
SUB L/R MONO
SUB XOVER THX 80Hz
LFE OFF
To Next Page
Loading...
Need help?
General
