EasyManua.ls Logo

Lexicon MPX 500 - Rear Panel Connections; Audio Connections

Lexicon MPX 500
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Lexicon
1-1
Chapter 1 Refe rence Documents, Required Equipment
Reference Documents
MPX 500 User Guide - Lexicon P/N 070-14116 or latest revision
Required Equipment
Tools
The following is a minimum suggested technician's tool kit required for performing disassembly, assembly
and repairs:
Clean, antistatic, well lit work area.
(1) #1 Phillips tip screwdriver
(1) T9 Torx screwdriver
(1) 3/16" Hex socket nut driver
(1) 5/16" Hex socket, full hollow, nut driver with plastic insert (to prevent Front Panel scratches)
(1) 15mm Hex socket nut driver
Solder: 63/37 - Tin/Lead Alloy composition, low residue, no-clean solder.
Magnification glasses and lamps
SMT Soldering / Desoldering bench-top repair station
Test Equipment
The following is a minimum suggested equipment list required to perform the proof of performance tests.
Amplifier with speakers or headphones.
Cables: (dependent on your signal source)
Audio Input cable (balanced) with shield and a XLR or ¼ “ plug on one end and an
appropriate connector on the opposite end for connection to the Low Distortion Oscillator.
Audio Output cable (balanced) with shield and a XLR or ¼ “ plug on one end and an
appropriate connector on the opposite end for connection to the Distortion Analyzer.
(1) MPX 500 Power Cord (choose accordingly):
CORD,POWER,NA/IEC,SVT,VW-1,10A, N. AMER Lexicon P/N 680-09149
CORD,POWER,IEC, 6A, 2M, EURO Lexicon P/N 680-08830
CORD,POWER,IEC, 5A, 2M, UK Lexicon P/N 680-10093
CORD,POWER,IEC, 6A, 2M, ITALY Lexicon P/N 680-10094
CORD,POWER,IEC, 6A, 2M, SWISS Lexicon P/N 680-10095
CORD,POWER,IEC, 6A, 2M, AUSTRALIA Lexicon P/N 680-10096
CORD,POWER,IEC, 6A, 2M, JAPAN Lexicon P/N 680-10097
CORD,POWER,IEC, 6A, 2M, UNIVERSAL Lexicon P/N 680-10098
(1) Low Distortion Oscillator with Single-ended or balanced output , <100 ohms output
impedance, < 0.005% THD.
(1) analog Distortion Analyzer and Level Meter with single-ended or balanced input, switchable
30Hz highpass filter or audio bandpass (20-20kHz) filter
(1) 100 MHz oscilloscope

Table of Contents

Other manuals for Lexicon MPX 500

Related product manuals