MPX 500 User Guide Basic Operation
13
Storing Programs
When you want to save a program, press Store. The Store and the Tap/Cancel LEDs will light to
indicate that the MPX 500 store function is armed. (If you want to exit without saving the current
program, press Tap/Cancel at any time before completing the store operation.)
The first available location in the User Bank will be selected by default when Store is pressed. To
select a different location (including the location of a User program you want to overwrite), press and
turn PROGRAM to select another location in the User Bank.
The program will be displayed with its original name and a numeric suffix (1-9). You can keep this
default name, or use Edit knobs 1 and 3 to select character positions and assign characters to create
a different name.
Press Store to save the program with its new name. When the Store operation is complete, the new
program will automatically load (becoming the currently running program).
To Next Page
Loading...
