Lexicon MPX User Manual

Lexicon, Inc.
3 Oak Park
Bedford, MA 01730-1441 USA
Tel 781-280-0300
Fax 781-280-0490
www.lexicon.com
Customer Support
Tel 781-280-0300
Fax 781-280-0495 (Sales)
Fax 781-280-0499 (Service)
Lexicon Part No. 070-14979 | Rev 0 | 02/02
DOCUMENTATION CONVENTIONS
This document is a supplement to the MPX Series user guides. It contains
information about MIDI SysEx (System Exclusive) message implementation for MPX
Series products, including the MPX 100, MPX 110, MPX 200, and MPX 500. It
assumes the user is familiar with the function of these units. Refer to the appropriate
user guide for general safety, installation, and operating instructions.
Executing SysEx messages is a complicated process. It is important to read this
document before attempting to use this feature with MPX Series products. Pay
particular attention to the precautions on page 6.
The following symbols are used in this document:
Calls attention to a procedure, practice, condition, or the like
that, if not correctly performed or adhered to, could result in
damage or destruction to part or all of the product.
Note: Calls attention to information that is essential to highlight.
© 2002 Lexicon, Inc. All rights reserved.
This document should not be construed as a commitment on the part of Lexicon, Inc. The information it
contains is subject to change without notice. Lexicon, Inc. assumes no responsibility for errors that may
appear within this document.
CAUTION

Lexicon MPX Specifications

General

Digital or Analog	Digital
Number of Channels	2
Form Factor	Rackmount
Rack Spaces	1U
Effects	Reverb, Delay, Chorus, Pitch Shift
Inputs	2 x 1/4" TRS
Outputs	2 x 1/4" TRS
THD+N	<0.01%
Frequency Response	20 Hz - 20 kHz