EasyManua.ls Logo

Lexicon PCM 80 - Page 79

Lexicon PCM 80
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-21
The Algorithms and Their Parameters
Parameters in this row provide level and phase setting for feedback of individual
voices, as well as a master feedback parameter for all voices. In the Glide>Hall
algorithm, a duplicate set of parameters is included for cross-feedback.
Master
A Master Feedback control is available in effects which have a feedback level
control for each voice. It allows the feedback level for all voices to be simulta-
neously adjusted over a range of 0-100%.
Voices
In the 4-Voice algorithms, four voice controls are provided for adjustment of the
level and polarity of signals recirculated back to the input of individual voices.
Note that, as Voices 1 and 2 and Voices 3 and 4 are paired, caution should be
observed not to create feedback within a pair which exceeds more than 100%.
In the Chorus+Rvb and the M-Band+Rvb algorithms, six voice parameters
control the feedback level of the voice delays. Voices 1, 2, and 3 Fbk control the
individual voice feedback levels from the left channel voice delay outputs to the
left channel delay feedback input. Voices 4, 5, and 6 Fbk control the individual
voice feedback levels from the right channel voice delay outputs to the right
channel delay feedback input.
The range of these parameters is from +100% down to 1% (Phase Normal
feedback), 0% (Off), –1% up to –100% (Phase Inverted feedback).
In the Glide>Hall algorithm, the Feedback row provides both Feedback and
Cross Feedback parameters as described below. Press Load/ at each row
position to toggle between Feedback and Cross Feedback parameters.
Mstr Fbk, Mstr X-Fbk
These parameters allow the feedback and cross feedback levels for all voices
to be simultaneously scaled over a range of 0-100%.
Voices 1-6 Fbk, X-Fbk
These parameters control the feedback and cross feedback levels and the
polarity of the voice delays.
Voices 1, 2, and 3 Fbk control the individual voice feedback levels from the left
channel voice delay outputs to the left channel delay feedback input.
Voices 1, 2, and 3 X-Fbk control the individual voice feedback levels from the left
channel voice delay outputs to the right channel delay feedback input.
Voices 4, 5, and 6 Fbk control the individual voice feedback levels from the right
channel voice delay outputs to the right channel delay feedback input.
Voices 4, 5, and 6 X-Fbk control the individual voice feedback levels from the
right channel voice delay outputs to the left channel delay feedback input. The
range of these parameters is from +100% down to 1% (Phase Normal feed-
back), 0% (off), –1% up to –100% (Phase Inverted feedback).
The sum of all Fbk and X-Fbk values for each channel should be less than 100%.
Feedback/
Cross Feedback

Table of Contents

Other manuals for Lexicon PCM 80

Related product manuals