Lexicon PCM 91 - Page 32

2-10 Basic Operation
Lexicon
ROW 1 SYSTEM (continued) 1.5 Mem Protect The PCM 91 provides a memory protection feature to prevent accidental overwriting of your stored effects. When this control is set to On, pressing the front panel Store button will cause an error message to be displayed. The PCM 91 is shipped with the Memory Protection function turned Off. 1.6 Auto Load This control allows you to choose whether PCM 91 effects will be loaded immediately when selected with SELECT and the Up and Down buttons (On), or whether they will require a press of the Load/✱ button (Off). 1.7 Patch Update When a controller is patched to an effect parameter, this control determines when the controller will take control of the parameter. If Immediate is selected, stored parameter values will jump to the current controller position when the effect is loaded. If Delayed is selected, the stored parameter value will remain in effect until the controller is moved. See Patching later in this chapter. 1.8 KeyWord For convenient effect sorting, the PCM 91 allows you to assign KeyWords (as many as four) to each effect. The KeyWord function here allows you to display effects according to type, or to turn this function off. Turn ADJUST to select an effect type from the list shown at the right. Press Load/✱ and use ADJUST to turn the
KeyWord function On or Off.
When shipped, the PCM 91 has the KeyWord function turned On, with A to Z selected. This allows you to view all of the effects in the Program or Register banks alphabetically. To access this display, press Program Banks or Register Banks repeatedly to step through all of the available banks. The KeyWord display will appear after the last bank. Press Control to jump to Control mode, where you can use ADJUST to select a different KeyWord for sorting. Press Program Banks or Register Banks to return to the KeyWord display — resorted according to your new selection. Most KeyWords (except for User 1-4 which are reserved for your use) have been assigned to several presets. KeyWords are assigned to effects in Edit mode. (See Editing an Effect.)
A to Z Acoustic Ambience Ballad Bright Broadcast Cascade Chamber Classical Cncrt Hall Custom Dark Dialog
Drums/Perc Dynamic Echo Film-ADR Gated Guitar Indoor Instrument Keyboard Large Live PA Long Mastering
Medium MIDI Mono Natural Orchestral Outdoor Plate RandomHall Room Short Slap FX Small Spatial
Special FX Splits Stereo Surround Tempo Unnatural Vocal User 1 User 2 User 3 User 4
PCM 91 KeyWords
1.8 Initialize Selecting this control arms the PCM 91 to revert to its factory set- tings. This will erase all registers and setups, and return the PCM 91 to its default states.