2-11
Basic Operation
PCM 91
If you press Store, the display will ask "Are you sure?" (Press STORE).
If you don't want to reinitialize your unit, press any button to
cancel the operation. If you press Store in response to this
message, the display will flash "Restoring original factory settings"
and your unit will be reinitialized.
ROW 2 CARD
2.0 Bank Copy
This control allows you to copy banks of effects from one location
to another. Banks can be copied internally, or to and from PCMCIA
Memory Cards. Try, for example, copying Preset Bank 0 into
internal Register Bank R0.
1. Press Store. The following display will appear briefly.
The asterisk indicates that Src is available for adjustment.
ADJUST will scroll through all available banks, including
internal preset and register banks, as well as any banks on
inserted cards. Internal banks are labeled "P0...P4" and "R0,
R1". Card registers will be labeled "C0, C1, C2" etc.
2. Press Load/✱ to move the asterisk to Dst.
Select and copy
effect banks
The display will then change to show:
Card Bank Copy
2.0 Src: ✱P0 Dst: R0
Card Bank Copy
2.0 Src: P0 Dst: ✱R0
Now, use ADJUST to select the destination of your copy.
Selecting a register bank here will cause its contents to be
erased and overwritten with the bank you have selected as the
source when Store is pressed.
4. Press Store to copy the selected source (in this case Preset Bank
0) into internal Register Bank R0. The display will ask "Are you
sure?" (Press STORE). Press any button to cancel. Press Store
to complete the store operation.
2.1 Load
This control is provided for future enhancement. It will allow you
to load audio software from a Memory Card simply by inserting the
new card and responding to the display prompts. The PCM 91 can
also share registers, maps and chains with the PCM 90 via RAM
cards. (Sharing Setups between the PCM 90 and the PCM 91 is not
recommended.)
To Next Page
Loading...
