2-17
Basic Operation
PCM 91
PROGRAM AND REGISTER BANKS
The PCM 91 has 450 factory-designed programs, organized into
nine Program Banks of 50 each, and 100 memory locations, called
registers, for storing your customized effects. Two Register Banks
are available in the PCM 91 itself. Additional Register Banks can be
stored on PCMCIA cards.
P8 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0
2.0
3.0
4.0
P7 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0
2.0
3.0
4.0
P6 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0
2.0
3.0
4.0
P5 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0
2.0
3.0
4.0
P4 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0
2.0
3.0
4.0
P3 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0
2.0
3.0
4.0
P2 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0
2.0
3.0
4.0
P1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0
2.0
3.0
4.0
P0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8
2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7
3.0 3.1 3.2 3.3 3.4 3.5 3.6
4.0 4.1 4.2 4.3 4.4 4.5
1.9
4.6 4.7 4.8 4.9
3.7 3.8 3.9
2.8 2.9
R1 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8
2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7
3.0 3.1 3.2 3.3 3.4 3.5 3.6
4.0 4.1 4.2 4.3 4.4 4.5
1.9
4.6 4.7 4.8 4.9
3.7 3.8 3.9
2.8 2.9
R0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8
2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7
3.0 3.1 3.2 3.3 3.4 3.5 3.6
4.0 4.1 4.2 4.3 4.4 4.5
1.9
4.6 4.7 4.8 4.9
3.7 3.8 3.9
2.8 2.9
The PCM 91 has 9 Program Banks, each with
50 factory-designed programs.
Two Register Banks provide 100 memory locations
for storing your own effects.
All PCM 91 programs have
one or more parameters
patched to the Adjust knob.
In Program Banks or Register
Banks mode, turn Adjust to
change the sound of the
currently running effect. While
Adjust is turned, the patch
name and value are displayed.
ADJUST
Bank Label
An asterisk in the display indicates that the displayed effect is not loaded.
Turn SELECT to display another effect.
Program Bank ID
Matrix Location
Program Name
Halls: Orchestral
P0 0.0 Deep Blue
Row Label
Halls: Orchestral
P0 0.1 ✱ Large Hall
SELECTING EFFECTS
The procedure for loading effects is the same, whether you are
choosing from banks of factory presets, or from your own banks of
registers. When first turned on, the PCM 91 will load whatever
effect was running when it was last turned off. When shipped from
the factory, the first effect in the first Program Bank (P0 0.0 Deep
Blue) is loaded. The Bank ID (P0-P8 ), matrix location, program
name, and bank and row labels are all displayed.
Press Program Banks repeatedly to cycle through the program
banks. Simultaneously press Program Banks along with either Up or
Down to backstep.
SELECT will scroll sequentially through all of the effects in one bank
and then begin scrolling through the next bank. Press Program
Banks to reselect the last displayed effect in another bank. Press
Load/✱ to load any displayed effect.
Custom controls allow you to create additional group parameter controls.
To Next Page
Loading...
