2-18
Basic Operation
Lexicon
SELECTING EFFECTS (continued)
In the Program and Register Banks, ADJUST is a Soft Knob. Each of
the factory-designed programs has one or more parameters
patched to this knob, providing a quick way to make useful
changes to the effect.
Turning ADJUST will display the patch name and the current value,
as well as any name assigned to the current value. Continue
turning ADJUST to alter the patched parameter's value. You can
create your own ADJUST knob parameter assignments for your
registers. (See Editing, later in this chapter.)
To select an effect stored in a register, press Register Banks. If you
have registers stored on a memory card, and have the card
inserted, pressing Register Banks repeatedly will cycle through all of
your stored bank selections. Simultaneously press Register Banks
along with either Up or Down to backstep. Turn SELECT to scroll
through all of the effects in the bank. As in Program Banks mode,
an asterisk in front of the effect name indicates that the displayed
effect is not loaded. Press Register Banks to reselect the last
displayed effect in another bank. Unused registers are indicated by
the message "available" on the display. Press Load/✱ to load the
displayed effect.
Turn ADJUST to briefly display the Soft Knob assignment.
Soft Knob name
ADJUST is patched to
Decay 30
Current Soft Knob
parameter setting.
Turn ADJUST to
alter this value.
Register Bank ID
The PCM 91’s internal register banks are
labeled R0 and R1; register banks created
on memory cards will be labeled C0, C1,
C2, etc.
The name you assign to a
stored effect will appear here.
“available” indicates that no
effect has been stored at this
location.
Note that scrolling through the effects in the Program or Register
banks will not load the effects, but will merely display them (unless
you have specifically turned on the Auto Load function in Control
Mode). Displayed effect names will be preceded by an ✱
indicating that they can be loaded by pressing Load/✱. (The
Load/✱ LED will light to indicate that the load function is available.)
To find out at any time what the currently running effect is, press
and hold Program Banks or Register Banks. An Info message will be
displayed providing the name of the currently running effect, as
well as the algorithm from which it is derived.
Matrix Location
User Effects
R0 0.0 ✱ available
The organization of programs in the five program banks and
descriptions of the 450 preset programs are given in Chapter 3.
To Next Page
Loading...
