RV-5 Mode Adjust
6-25
5.1a STANDARD
This mode allows 5.1-channel analog sources to use bass
management, speaker crossovers, speaker distance calibration, and
audio controls (tone controls). When these features are not used,
the 5.1a STANDARD listening mode is similar to the 5.1a BYPASS
listening mode. The 5.1a STANDARD mode sends identical signals
(with appropriate time delays) to the Main Zone audio output
connectors labeled Side L and Rear as well as Side R and Rear R.
See “Listening Mode Menu Option and Parameter Descriptions” on page 6-30 for
detailed descriptions
.
5.1a 2-CHANNEL
This mode downmixes 5.1-channel analog input signals into
2-channel LOGIC7-encoded output signals. It sends these signals to
the front speakers and the subwoofer. It is recommended for
recording purposes, particularly for recording from a DVD-A or
multi-channel SACD player to a CD-R or another 2-channel record-
ing format.
See “Listening Mode Menu Option and Parameter Descriptions” on page 6-30 for
detailed descriptions
.
Parameter
OUTPUT LEVELS Refer to page 6-28
CUSTOM Refer to page 6-28
5.1a STANDARD
MODE ADJUST
Parameter Default Setting Possible Settings
CENTER MIX +0dB -25 to +5dB
SURROUND MIX +0dB -5 to +5dB
CNTR DLY SAMPLES +0 -127 to +127
MASTER LEVEL +0dB -5 to +5dB
LFE MIX +0.0dB -20.0 to +0.0dB
SUB L/R LVL +0dB OFF, -30 to +12dB
CUSTOM Refer to page 6-28
5.1a 2-CHANNEL
MODE ADJUST
To Next Page
Loading...
Need help?
General