Lexmark 210 Moving Guide

Moving Guide
Before moving the printer
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer
damage:
• Turn off the printer, and then unplug the power cord from the electrical outlet.
• Disconnect all cords and cables from the printer.
• If two or more optional finishers are installed, then remove the finishers individually from the printer.
Notes:
– Make sure to remove the topmost finisher first.
– To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.
• If the printer does not have a caster base but is configured with optional trays, then remove the trays.
Note: Slide the latch on the right side of the optional tray toward the front of the tray until it clicks into place.
Moving Guide
Page 1 of 3

Lexmark 210 Specifications

General

Print Technology	Inkjet
Color Output	Color
Print Resolution	Up to 4800 x 1200 dpi
Scanner Type	Flatbed
Scanner Resolution	Up to 600 x 1200 dpi
Printer Type	Multifunction
Functions	Print, Scan, Copy
Connectivity	USB
Supported Media Sizes	Letter, Legal, A4, envelopes
Ink Cartridges	Black, Color
Operating Systems Supported	Windows, macOS