Why does paper curl after printing with my Lexmark Printer?
If paper curls badly after printing with your Lexmark printer, the Paper Weight setting may be incorrect for the type of paper you are using. Change the Paper Weight setting to Smooth.
Why is my Lexmark Printer printing too light?
If your Lexmark printer is printing too lightly, it could be due to several reasons: * The Toner Darkness setting is too light. * You are using paper that does not meet the printer specifications. * The toner cartridge is low on toner. * The toner cartridge is defective. To fix this, try these solutions: Select a different Toner Darkness setting from the printer driver, load paper from a new package, avoid textured paper, make sure the paper you load in the trays is not damp, and replace the toner cartridge.
Why is my Lexmark Printer printing too dark?
If your Lexmark printer is printing too dark, it could be because the Toner Darkness setting is too dark or the toner cartridge is defective. To solve this, select a different Toner Darkness setting from the printer driver or replace the toner cartridge.
How to fix toner specks on Lexmark E 240 Printer?
Toner specks on your Lexmark printouts can be caused by a defective toner cartridge, a worn or defective fuser, or toner in the paper path. To address this, try the following: replace the toner cartridge, replace the fuser. If the issue persists, call for service.
Why does my Lexmark E 240 Printer have a gray background when printing?
A gray background on your Lexmark printer's output can occur if the Toner Darkness setting is too dark or if the toner cartridge is defective. Try selecting a different Toner Darkness setting from the printer driver, or replace the toner cartridge.
Why are the margins incorrect on my Lexmark E 240 Printer?
Incorrect margins on your Lexmark printer can occur if the Form Size setting in the printer driver is different from the size paper loaded in the tray. Set the Form Size to A4 to correct this.
How to prevent dust on Lexmark E 240 Printer paper tray?
To prevent dust from gathering on the extended paper tray of your Lexmark printer, attach the dust cover to the back of the printer. This protects the paper tray from the environment and prevents it from being knocked out of position.
What causes uneven print density on Lexmark E 240 Printer?
Uneven print density on your Lexmark printer is caused by a defective toner cartridge. Replace the toner cartridge to resolve this issue.
Why does toner rub off easily from Lexmark E 240 output?
If toner rubs off easily from the paper after printing with your Lexmark printer, the Paper Texture or Paper Weight setting might be incorrect, or the fuser could be worn or defective. Try changing the Paper Texture from Normal to Smooth or Rough and the Paper Weight from Plain to CardStock (or other appropriate weight). If the issue persists, replace the fuser.
Why does my Lexmark E 240 print only on one side of the page?
If your Lexmark printer is only printing on one side of the page, it's possible that the toner cartridge is not properly installed. Remove and then reinsert the toner cartridge to ensure it is correctly seated.
Instructions for installing printer software on Windows operating systems.
Steps for installing printer software on Macintosh operating systems.
Guidance for installing printer software on UNIX and Linux platforms.
Procedures for configuring printers for direct or shared network printing in Windows.
Steps to set up network printing for Macintosh computers.
Instructions for network printing on UNIX and Linux environments.
Steps for assigning an IP address to the printer for network connectivity.
Information on what supplies are needed and how to order them.
Step-by-step instructions for replacing the printer's toner cartridge.
Procedure for replacing the photoconductor kit in the printer.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 24 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 10, 000 pages |
| Standard Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Duplex Printing | Manual |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Output Tray Capacity | 100 sheets |
| Media Sizes Supported | Letter, Legal, A4, A5, B5 |
| Media Types Supported | Plain Paper, Envelopes |
To Next Page