Lexmark E 240 - Font Error; Network Interface Errors

77
Operator panel codes
Font error
Network interface errors
Light sequence:
• Continue—On
• Toner Low/Replace PC Kit—Blink
• Error—On
What this light sequence means:
The printer has received a request for a PPDS font which is not installed.
What you can do:
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.
• Press Continue to clear the message and continue printing.
Light sequence:
• Continue—On
• Paper Jam—On
• Error—On
What this light sequence means:
The printer cannot establish communication with the network.
What you can do:
Press Continue to clear the message and continue printing. (The job may not
print correctly.)